CFD
ZPVehicle Prototype External Aerodynamics
Adjust inlet velocity from 20 to 35 m/s on the fixed ZPVehicle prototype to predict surface pressure, wall shear stress, volume velocity and pressure.
Published scope
The inputs, geometry and outputs below follow the registered public case. Published verification applies only to the stated conditions. Service availability requires a live request.
Transolver
This prototype case uses a composite body, wheels and an external fluid domain. Its page preview, surface points, volume points and existing prediction package all refer to the same registered geometry.
The existing model predicts surface pressure, wall shear, volume velocity and volume pressure on this fixed geometry. The inlet-velocity parameter is limited to the registered 20 to 35 m/s range.
- Geometry
- ZPVehicle prototype composite geometry
- Geometry scope
- same_geometry_only
Adjustable inputs
| Input | Range | Default |
|---|---|---|
| Inlet velocity | 20.0 – 35.0 m/s | 22.5 |
Output fields
- surface: Pressure, Wall Shear Stress X/Y/Z
- volume: Velocity X/Y/Z, Pressure
Registered verification
- Accuracy boundary
- Custom velocities have no packaged Fluent reference; the response is a real model prediction without an accuracy claim.
Recorded workflow evidence
- Project opening
- PASS
- Save and reopen
- PASS
- Training
- NOT_RUN
- Prediction
- NOT_RUN
- Independent accuracy
- NOT_RUN
- Portable validation
- NOT_RUN
These are recorded checks; they do not establish live service availability or accuracy for every new request.